Dell Emulex Family of Adapters - Manual (Page 306)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
2. Installing and Uninstalling the CLI
Windows
306
The Emulex CIM Provider is available as an offline bundle in ESXi platforms. VMware
recommends using the offline bundle to update software on VMware platforms. For
more information about the ESXi Patch Management activities, see the VMware
website.
To install the Emulex CIM Provider in a VMware ESXi hypervisor environment, use the
esxli command line utility and perform the following steps:
1. Copy the CIM provider zip file to /var/log/vmware.
2. Log on to the VMware hypervisor host, and execute the following command all on
one line:
esxcli software vib install -d
vmware-esx-provider-emulex-cim-provider-50.3.6.11.1-01.zip
--maintenance-mode
3. Reboot the system.
Windows
Installing in Windows
There are two ways to install the OneCommand Manager CLI in Windows:

Attended installation – you are present during the installation. You will be
prompted for more information for the installation to continue.

Unattended installation – you do not need to be present during the installation.
Installation will complete on its own. Installation progress may be displayed as
an option.
Attended Installation
To install the OneCommand Manager CLI, run the installation.exe file for a core
Windows driver kit that does not include the OneCommand Manager GUI, and follow
the installer directions.
Use the following syntax for the installation executable file:
elxocmcore-windows--.exe

is either “x64” or “x86”.

represents the complete kit version.
For example, at the command prompt, type
elxocmcore-windows-x64-5.0.2.14-1.exe
Unattended Installation
To install the OneCommand Manager CLI in Windows unattended, use the following
procedure:
1. From the Emulex website, download the x64 or x86 OneCommand Manager Core
Kit installation file to your system.