Displaying all parameters – Dell Emulex Family of Adapters User Manual

Page 617

Emulex Drivers for Windows User Manual

P010077-01A Rev. A

3. Configuration

NIC Driver Configuration

617

Displaying All Parameters

To display the current value of all parameters, use either “-p” or “-q” command line

options. This shows the registry value or driver value of the parameter, or both when

using “-pq” together.
For example:

occfg.exe -a "SLOT 5 Port 1" -pq

OneConnect Network Config (10.2.164.0)

Emulex OneConnect OCe14102-UX-D 2-port PCIe 10GbE CNA (SLOT 5 Port 1)

Display all properties.

[Registry] Class of Service (802.1p) = 1 (Auto Priority Pause)

[Driver] Class of Service (802.1p) = 1 (Auto Priority Pause)

[Registry] Encapsulated Task Offload = 1 (Enabled)

[Driver] Encapsulated Task Offload = 1 (Enabled)

[Registry] Enhanced Transmission Selection = 0 (Disabled)

[Driver] Enhanced Transmission Selection = 0 (Disabled)

[Registry] Flow Control = 3 (Rx & Tx Enabled)

[Driver] Flow Control = 0 (Disabled)

[Registry] IPv4 Checksum Offload = 3 (Rx & Tx Enabled)

[Driver] IPv4 Checksum Offload = 3 (Rx & Tx Enabled)

[Registry] Interrupt Moderation = 4 (Adaptive (default))

[Driver] Interrupt Moderation = 4 (Adaptive (default))

[Registry] Large Send Offload V1 (IPv4) = 1 (Enabled)

[Driver] Large Send Offload V1 (IPv4) = 1 (Enabled)

[Registry] Large Send Offload V2 (IPv4) = 1 (Enabled)

[Driver] Large Send Offload V2 (IPv4) = 1 (Enabled)

[Registry] Large Send Offload V2 (IPv6) = 1 (Enabled)

[Driver] Large Send Offload V2 (IPv6) = 1 (Enabled)

[Registry] Maximum Number of RSS Processors =

[Driver] Maximum Number of RSS Processors =

[Registry] Maximum Number of RSS Queues = 6

[Driver] Maximum Number of RSS Queues = 6

[Registry] Maximum RSS Processor Number =