Dell Emulex Family of Adapters - Manual (Page 218)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
OCe14000-Series Adapters
218
To configure a single personality:
1. From the discovery-tree, select the OCe14000-series adapter whose personality you
want to configure.
2. From the Adapter Configuration tab, check the Single personality (all ports) radio
button.
3. Select the personality you want to apply from the Personality pull-down menu.
If you choose the NIC + RoCE configuration, the NIC + RoCE configuration list
displays descriptions of the available RoCE profiles.

Choose the RoCE-2 profile for SMB Direct on Windows Server 2012 and
Windows Server 2012 R2 from the pull-down menu in the NIC + RoCE
Configuration box.
Note: Check the Implementer's Lab on the Emulex website for any updated
information on additional use cases for the RoCE-2 profile.

For the RoCE-1 profile, check the Implementer's Lab on the Emulex website for
any updated information on use cases for the RoCE-1 profile.
After rebooting a NIC + RoCE configuration, the Current Configuration field
displays NIC + RoCE along with the description of the selected RoCE profile.
Note: RoCE configurations are not supported with SR-IOV.
Note: If you choose a NIC-Only configuration, there may be multiple NIC-Only
configurations available (for example; NIC-Only or NIC-Only, No ETS). If
the adapter supports multiple NIC configurations (profiles), you must select
a NIC-Only configuration from the NIC-Only configuration list.
4. Click Apply. A message appears notifying you of the profiles activation
requirements. Not all selections require a reboot.
Custom Configurations
The Custom configuration view allows you to customize the protocols running on each
port of an adapter. The Port Configuration table only displays the available ports.