Dell Emulex Family of Adapters - Manual (Page 1355)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1355
getlunlist
Syntax
elxvcpcmd.exe v= u= p=
getlunlist
Description
This command shows the LUNs attached to the FC and FCoE target of the specified
FC/FCoE port.
Parameters
getexpresslanelunlist (LPe16000–Series and OCe15100–
Series Only)
Syntax
elxvcpcmd.exe v= u= p=
getexpresslanelunlist
Description
This command shows the LUNs that support ExpressLane and their respective
ExpressLane status.
Note: Only LUNs that support ExpressLane are shown by this command. LUNS
without ExpressLane support are not shown.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
Target WWPN
The WWPN of the iSCSI target.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of the FC/FCoE function connected to the target.
Target WWPN
The WWPN of the FC/FCoE target.