Dell Emulex Family of Adapters - Manual (Page 1292)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
OCe14100–Series Adapters
1292

Priority Membership – The different priorities assigned to the various Priority
Groups. This is the current active configuration.

Bandwidth – The bandwidths that are assigned to different Priority Groups.
This is the current active configuration.
Configured Groups

Group ID – The Priority Group ID.

Priority Membership – The configured priority membership grouping.

Bandwidth% – The configured bandwidth value for the different Priority
Groups.
Configure DCB Dialog Box Buttons

Defaults – Click to return parameters to default DCB settings.

Configuration Rules – Click to view a window that lists the rules for configuring
priorities. You must observe these rules when configuring Priority Groups for
adapter ports. Configuration rules are displayed based on the type of adapter
ports you are configuring.

OK – Click to apply and save your changes.

Cancel – Click to discard any changes you made.
FCoE and iSCSI Configuration Rules

One and only one priority is configured for the priority.

You can select a maximum of two PFC priorities and one of them must match
the priority.

The PFC Priority Group to which the priority is assigned must contain no other
priorities.

The additional PFC priority must be assigned to a Priority Group which has no
other priority.

Bandwidths of all the Priority Groups must total 100%.
NIC Configuration Rules

One and only one priority is configured for the priority.

The PFC priority must be assigned to a Priority Group which has no other
priorities.

Bandwidths of all the Priority Groups must total 100%.