Dell Emulex Family of Adapters - Manual (Page 1135)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the NIC Driver
1135
NIC Adapter Firmware Error
The following POST message appears if you have loaded firmware on the adapter that
the controller does not support:
POST Error : Firmware halted. This firmware does not support this
controller.
Warning
Invalid MTU requested. MTU must
be between 64 and 9000 bytes.
Invalid MTU size in MTU
configuration IOCTL. The MTU will
not be changed.
Warning
Invalid vlan priority labeled.
Must be 0 - 7
A request to set a VLAN priority tag
was made with an invalid value.
Warning
Failed to allocate memory for
pass through command
The memory allocation for a pass
through command failed. The driver
will continue to function. The
configuration utility that issued the
pass through IOCTL will fail.
Warning
Pass through command failed.
opcode , status 0x
The pass through firmware command
with the indicated opcode failed.
The driver should continue to
function. The configuration utility
that issued the pass through IOCTL
will fail.
Warning
Command to modify EQ delay
failed
The firmware command to change
the EQ delay failed. The driver will
continue to function. Adaptive
interrupt coalescing does not
function correctly.
Table 4-5 ESXi Server NIC Event Log Entries (Continued)
Severity Displayed Message Description