Dell Emulex Family of Adapters - Manual (Page 476)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
3. Adapter Management Utility Command Line Interface
Process UCNAs and CFAs (/ucna)
476
Notes:

/fc is not available on ElxflashOffline_NIC_only.

This switch supports LPe16202 CFAs in FC mode.
Process UCNAs and CFAs (/ucna)
Usage:
/ucna
The Process UCNA and CFAs switch causes elxflash to act only on UNCAs or CFAs.
Example usage:
./elxflash /q /ucna
- Only UCNAs are displayed for a query.
./elxflash /auto /up /ucna
- Apply auto update only to UCNAs.
When doing a firmware or boot code update and the /ucna switch is used, only
UCNAs are updated; FC HBAs are not displayed.
Note: This switch supports LPe16202 CFAs in NIC mode.
Query (/q)
Usage:
/q
The query switch displays an adapter's model, WWN or MAC address, PCI_ID,
firmware version, and boot code version. Query can be used with any switch.
FC Adapter Status Summary
HBA=, Port Type=, WWN =, Firmware=,
Boot Code=, Boot Code enable=
FCoE Adapter Status Summary
HBA=, Port Type=, WWN =, Firmware=,
Boot Code=
iSCSI and NIC-only Adapter Status Summary
HBA=, Port Type=, MAC =,
Firmware=, Boot Code=
Notes:

On FC adapters, the query switch displays boot code version information only if
the adapter has boot code installed.

When the query switch is used with an operational switch, the query also
includes an additional field called “Supported Firmware” or “Supported Boot
Code”.