Dell Emulex Family of Adapters - Manual (Page 1711)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
13. Configuring UEFI for FCoE
Displaying Adapter Information
1711
Displaying Adapter Information
The Adapter Information screen shows the following information about the selected
adapter:

Adapter status

Network boot status

Link speed

Topology

Firmware version – refer to this firmware version if reporting a problem to
Emulex Technical Support

Universal boot version

EFI Boot version
To display adapter information:
1. From the Device Manager screen (Figure 13-2), select the adapter whose
information you want to view and press .
2. From the Emulex Adapter Configuration Main Menu (Figure 13-3), select Display
Adapter Info and press . Information about the selected adapter is
displayed.
Figure 13-20 Controller Information