Dell Emulex Family of Adapters - Manual (Page 477)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
3. Adapter Management Utility Command Line Interface
Ramdrive (/ramdrive) - (Windows Offline Adapter Management Utility only)
477
For example:
C:\elxflashStandalone-windows-10.0.567.22-1\win>elxflash.bat /q
HBA=LPe16002, Port Type=FC, WWN=10:00:00:00:C9:D1:6A:52, PCI ID=E200, VID=10DF,
SSID=E206, SVID=10DF, Firmware=1.1.48.0, Boot Code=KT803A10, Boot Enabled=1
HBA=LPe16002, Port Type=FC, WWN=10:00:00:00:C9:D1:6A:53, PCI ID=E200, VID=10DF,
SSID=E206, SVID=10DF, Firmware=1.1.48.0, Boot Code=KT803A10, Boot Enabled=1
HBA=OCe10100-FCoE, Port Type=FCoE, WWN=10:00:00:90:FA:30:44:1D, PCI ID=0704, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-FCoE, Port Type=FCoE, WWN=10:00:00:90:FA:30:44:21, PCI ID=0704, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-iSCSI, Port Type=iSCSI, MAC=00:00:C9:A9:B8:C8, PCI ID=0702, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-iSCSI, Port Type=iSCSI, MAC=00:00:C9:A9:B8:CA, PCI ID=0702, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-iSCSI, Port Type=NIC, MAC=00:00:C9:A9:B8:C7, PCI ID=0700, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-iSCSI, Port Type=NIC, MAC=00:00:C9:A9:B8:C9, PCI ID=0700, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-FCoE, Port Type=NIC, MAC=00:90:FA:30:44:1C, PCI ID=0700, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
HBA=OCe10100-FCoE, Port Type=NIC, MAC=00:90:FA:30:44:20, PCI ID=0700, VID=19A2,
SSID=E602, SVID=10DF, Firmware=4.9.118.0, Boot Code=2.0.42.0
Ramdrive (/ramdrive) - (Windows Offline Adapter
Management Utility only)
Usage:
/ramdrive=[:]
The ramdrive switch specifies the drive for creating temporary and log files. The
default is drive X; the default drive in Windows PE.
Remote (/remote) - (Online Adapter Management
Utility only)
Usage:
/remote
The remote switch enables updates on remote in-band adapters.
Rewrite (/rewrite or /e)
Usage:
/rewrite
-or-
/e
The rewrite switch updates the firmware or boot code of each adapter if the installed
versions are earlier than or the same as the rewrite versions. This switch cannot be used
with /update or /downgrade.
Example usage:
./elxflash /rewrite /auto
– Rewrites the firmware boot code using
auto-discovery.