Dell Emulex Family of Adapters - Manual (Page 1768)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix F. Dell UEFI
Main Configuration Page
1768
Boot Scan Selection Specify the adapter’s initiator behavior for booting the system from
specified FC boot targets or fabric discovered targets.
Available settings include:
• Disabled (default) – Initiator does not attempt to boot.
• First LUN – Attempt boot from the first bootable LUN of the
targets discovered by adapter.
• First LUN 0 – Attempt boot from the first bootable LUN 0 of the
targets discovered by adapter.
• First LUN Not LUN 0 – Attempt boot from the first bootable LUN
that is not LUN 0 of the targets discovered by adapter.
• Fabric Discovered LUN – Attempt boot based on the LUN
assignment provided by the fabric’s management infrastructure.
• Specified LUN – Initiator attempts to boot to the specified World
Wide Port Name and LUN for the first target. If that fails, a boot
using the second target parameters is attempted.
Table F-4 FCoE General Parameters Page Menu Options (Continued)
Menu Option Description and Available Settings