Dell Emulex Family of Adapters - Manual (Page 487)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Running the Standalone Adapter Management Utility
487
The following files and directories should be present:

i386\

x86_64\

ppc64\

elxflash.sh

linlpcfg.sh
The elxflash.sh script is used to configure the environment, run elxflash, and revert
any changes before exiting. This script installs the MILI daemon if it is not installed.
The linlpcfg.sh script is used to configure the environment, run linlpcfg, and revert
any changes before exiting. This script installs the MILI daemons if they are not
installed.
Notes:

The MILI service is temporarily installed. The service is removed once the script
execution is completed.

If OneCommand Manager is installed, the OneCommand Manager libraries are
used by the elxflash and linlpcfg utilities.

The linlpcfg.sh and elxflash.sh scripts call the native versions of elxflash and
linlpcfg. For example, on Linux x86_64, the 64-bit utilities are called.

The adapter being managed by the Standalone Adapter Management utility
must not be managed simultaneously by other Emulex utilities including
OneCommand Manager.
5. To update firmware and bootcode on an adapter, type
# ./elxflash.sh /auto up
To display a list of HBAs, type
# ./linlpcfg.sh listhba
Each time elxflash or lpcfg is run, a log file is created. On Linux these files are
called:
/var/log/clu/elxflash.log
/var/log/clu/linlpcfg.log