Importiscsi – Dell Emulex Family of Adapters User Manual

Page 381

OneCommand Manager Command Line Interface Version 10.2 User Manual

P010067-01A Rev. A

5. CLI Client Command Descriptions

iSCSI Commands

381

Supported By

Linux, Solaris, VMware ESXi, and Windows

Syntax

GetSessionInfo

Target_IP>>

Parameters

ImportiSCSI

This command imports iSCSI targets from an XML file to the iSCSI ports on the host.

The XML file is created by the ExportiSCSI command.

Supported By

Windows Only

Syntax

ImportiSCSI [clean]

Parameters

Example

In this example, the command imports the iSCSI targets found in the targets.xml file to

the iSCSI ports found on the host, and erases the iSCSI configuration (including targets)

of all iSCSI ports on these host before importing the targets.

hbacmd ImportiSCSI targets.xml clean

The example output:

All existing targets have been removed.

Added target iqn.2006-01.com.openfiler:target121-000.on.port.00-00-c9-be-1a-24

Added target iqn.2006-01.com.openfiler:target121-001.on.port.00-00-c9-be-1a-24

MAC_Address

The MAC address of an iSCSI port.

iscsi_target_name

Target’s iSCSI name enclosed in quotes (string length: 11–255).

TSIH

TSIH value of the session (value: 1–65535).

ISID_Qual

ISID qualifier of the session (value: 0–65535).

Target_IP

The Target's IP address. You can specify an IPv4 or IPv6 IP address.

Import_File

The name of XML file containing import information that was

clean

Erases entire iSCSI configuration on all iSCSI ports before

importing targets.

Note: This command fails if the system is booted from an iSCSI

target.