Dell Emulex Family of Adapters - Manual (Page 727)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix D. AutoPilot Installer Command Line and Configuration File Parameters
AutoPilot Installer Syntax
727
You can specify a non-default directory for the driver kit by specifying an 'installation
folder' on the command line. For example:
elxdrv-fc-fcoe.exe install:"C:\Emulex"
This option can be used in conjunction with the “APArgs” directive.
AutoPilot Installer Syntax
The syntax used to run AutoPilot Installer silently from a command line or script is:
APInstall [/silent] [parameter setting][parameter setting...]
The “silent” switch and parameter settings can occur in any order. One or more spaces
must separate the switch and each parameter setting.
The syntax of a parameter setting is:
parameter_name =["]value["]
Double quotes are required only around values that contain spaces. Spaces may
separate parameters, equal signs and values. Parameter names and values are not
case-sensitive.
The APInstall command may contain the settings listed below. Each setting, except
ConfigFileLocation, may also be specified in the AutoPilot Configuration file. For
descriptions of each parameter, see “Software Configuration Parameters” on page 728.
Settings specified in the APInstall command override those specified in the
configuration file.
ConfigFileLocation = path-specifier
NoSoftwareFirstInstalls = { TRUE | FALSE }
SilentRebootEnable = { TRUE | FALSE }
ForceDriverUpdate = { TRUE | FALSE }
ForceDriverTypeChange = { TRUE | FALSE }
SkipDriverInstall = { TRUE | FALSE }
InstallWithoutQFE = { TRUE | FALSE }
ForceRegUpdate = { TRUE | FALSE }
LocalDriverLocation = path-specifier
ReportLocation = path-specifier
Path Specifiers
Paths may be specified as

an explicit path:
ReportLocation="C:\Program Files\Emulex\AutoPilot
Installer\Reports"