Dell Emulex Family of Adapters - Manual (Page 433)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Profile Management Commands
433
Port 3: NIC,NIC
Port 4: NIC,NIC
Reboot Configuration
Profile ID : 37
MC Type : NPAR
NParEP Mode : Disabled
Port Assignments:
Port 1 (p0): NIC,iSCSI
Port 2 (p1): NIC,FCoE
Port 3 (p2): NIC,FCoE
Port 4 (p3): NIC,iSCSI
Note: (pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
2 Ports - NParEP Mode-Disabled, 4 Functions/Port
>hbacmd setadapterportconfig 00-00-c9-12-34-56 p0=nic,iscsi,nic,fcoe
p1=nic,fcoe,iscsi,nic mctype=npar nparepmode=0
Successfully changed port configuration. A reboot is required to
complete changes.
>hbacmd getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 2
Maximum FCoE Functions : 2
Maximum iSCSI Functions : 2
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : No
ROCE Functions Allowed : Yes
RebootRequired : Yes
Active Configuration
Profile ID : 16
MC Type : None
Port Assignments:
Port 1: NIC
Port 2: NIC
Reboot Configuration
Profile ID : 33
MC Type : NPAR