Dell Emulex Family of Adapters - Manual (Page 1373)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1373
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI)
Concurrent Mode with Two Ports
elxvcpcmd.exe v=10.192.000.000 u=root p=vmware h=10.192.000.000
setadapterportconfig 00-00-c9-12-34-56 p0=nic,iscsi,fcoe p1=nic,fcoe
C:\Program Files\Emulex\Util\OCManager>hbacmd getadapterportconfig
00-00-c9-12-34-56
Number of Ports : 2
Maximum FCoE Functions : 4
Maximum iSCSI Functions : 4
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : Yes
RebootRequired : Yes
Active Configuration
Profile ID : 33
MCType : None
Port Assignments:
Port 01: NIC,iSCSI,FCoE
Port 12: NIC,iSCSI,FCoE
Reboot Configuration
Profile ID : 33
MCType : None
Port Assignments:
Port 1 (p0): NIC,iSCSI,FCoE
Port 2 (p1): NIC,FCoE,None
Note: (pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
setbeacon
Syntax
elxvcpcmd.exe v= u= p=
h= setbeacon
Description
This command turns the beacon on or off.
Parameters
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.