Dell Emulex Family of Adapters - Manual (Page 1643)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1643
To select the NIC Mode:
1. From the Configure SRIOV screen (Figure 11-12), select the NIC Mode setting for a
particular NIC function and a pop-up menu appears.
Figure 11-13 Configure NIC Mode Pop-up Menu
2. Select NIC Only Profile or NIC-ETS Disabled and press .
3. When you are finished, press to return to the Controller Configuration
screen.
Saving the Current Configuration
To save the configuration changes, on the Controller Configuration screen, select Save
Current Configurations and press .