Dell Emulex Family of Adapters - Manual (Page 438)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Profile Management Commands
438
Concurrent Mode I/O Allowed : Yes
ROCE Functions Allowed : Yes
RebootRequired : Yes
Active Configuration
Profile ID : 33
MC Type : NPAR
Port Assignments:
Port 1: NIC,iSCSI,FCoE,NIC
Port 2: NIC,iSCSI,None,NIC
Port 3: NIC,iSCSI,NIC,FCoE
Port 4: NIC,iSCSI,FCoE
Reboot Configuration
Profile ID : 16
MC Type : None
Port Assignments:
Port 1 (p0): NIC
Port 2 (p1): NIC
Port 3 (p2): NIC
Port 4 (p3): NIC
Note: (pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
2 Ports - Switching from all NIC to NIC+RoCE on First Port.
Run Profile 21: RoCE-2
>hbacmd setadapterportconfig 00-00-c9-12-34-56 p0=nic+roce p1=nic
pid=21 mctype=none
Successfully changed port configuration. A reboot is required to
complete changes.
>hbacmd getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 2
Maximum FCoE Functions : 2
Maximum iSCSI Functions : 2
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : Yes
ROCE Functions Allowed : Yes
RebootRequired : Yes
Active Configuration