Dell Emulex Family of Adapters User Manual
Page 907
Emulex Drivers Version 10.2 for Linux User Manual
P010081-01A Rev. A
4. Troubleshooting
Log Messages
907
0433: Wakeup on signal: rc=
A signal other than the LPFC_DATA_READY was received on the worker thread.
Data:
None
Severity: Error
Log:
LOG_ELS
Action:
Unload and reload the driver.
0434: PM resume failed to start worker thread: error=
The driver's power management resume function could not start the worker thread.
Data:
None
Severity: Error
Log:
LOG_INIT
Action:
Unload and reload the driver.
0435: Adapter failed to get Option ROM version status
The driver could not read the HBA’s option ROM.
Data:
None
Severity: Error
Log:
LOG_INIT
Action:
Reset the HBA. Ensure the adapter’s firmware is current.
0436: Adapter failed to init, timeout, status reg
The adapter failed during power-up diagnostics after it was reset.
Data:
None
Severity: Error
Log:
Always
Action:
This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0437: Adapter failed to init, chipset, status reg
The adapter failed during power-up diagnostics after it was reset.
Data:
None
Severity: Error
Log:
Always
Action:
This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0438: Adapter failed to init, chipset, status reg
The adapter failed during power-up diagnostics after it was reset.
Data:
None
Severity: Error
Log:
Always
Action:
This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0439: Adapter failed to init, mbxCmd
Adapter initialization failed when issuing a READ_REV mailbox command.
Data:
None
Severity: Error
Log:
Always
Action:
This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)