Dell Emulex Family of Adapters - Manual (Page 1348)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1348
Note: For multichannel and NPar configurations, this command only shows the port
protocol assignments. For the entire multichannel configuration use the
cmgetparams command.
Parameters
Examples
Mixed Mode
hbacmd getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 4
Maximum FCoE Functions : 4
Maximum iSCSI Functions : 4
Mixed Mode I/O Allowed : Yes
Concurrent Mode I/O Allowed : No
RebootRequired : No
Active Configuration
Profile ID : 37
MCType:None
Port Assignments:
Port 0: NIC,iSCSI
Port 1: NIC,iSCSI
Port 2: NIC,FCoE
Port 3: NIC,FCoE
Reboot Configuration
Profile ID : 37
MCType:None
Port Assignments:
Port 0 (p0): NIC,iSCSI
Port 1 (p1): NIC,iSCSI
Port 2 (p2): NIC,FCoE
Port 3 (p3): NIC,FCoE
Note:(pN) labels are the port parameter names to use in the
SetAdapterPortConfig command (e.g. p0=NIC,FCoE p1=NIC,iSCSI).
Concurrent Mode – Two–Port Adapter (port number starting at one)
hbacmd getadapterportconfig 00-00-c9-12-34-56
Number of Ports : 2
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of the FCoE port.
MAC
The MAC address of the NIC or iSCSI port.