Dell Emulex Family of Adapters User Manual
Page 1114
Emulex Drivers Version 10.2 for VMware ESXi User Manual
P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1114
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes2746: Requesting for FCF rediscovery failed status
add_status
DESCRIPTION:
DATA: None
ACTION: None required.
elx_mes2747: Issue FCF scan read FCF mailbox command failed
DESCRIPTION: The driver wanted to send a read FCF record mailbox command to
start fast FCF failover FCF scan, but failed to send the mailbox command due to state of
the adapter.
DATA: None
ACTION: None required.
elx_mes2748 Failed to prepare for unregistering HBA's FCF record:
rc=
DESCRIPTION: Driver encountered an initialization error when preparing to rescan
the FCF tables and needed to unregister an old FCF record.
DATA: None
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes2749 Failed to prepare for unregistering HBA's FCF record:
rc=
DESCRIPTION: Driver encountered an initialization error when preparing to
unregister an FCF and needed to prepare the command.
DATA: None
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes2751: Adapter failed to restart, status reg
<0xA8> AC <0xAC>
DESCRIPTION: The adapter has failed to restart.
DATA: None
ACTION: If the issue persists, report the error to Emulex technical support.
elx_mes2752: KILL_BOARD command failed retval
DESCRIPTION: The KILL BOARD mailbox command failed to complete.
DATA: None