Dell Emulex Family of Adapters - Manual (Page 96)

OneCommand™ Manager Application P010066-01A Rev. A
5. Configuring Discovery
Configuring iSCSI Target Discovery
96

The target was manually added.

The target was discovered via a target portal.

The target was found through an iSNS server query.
Target Discovery Buttons

Add Portal – Click to add a target portal. See “Adding Target Portals” on
page 96 for more information.

Remove Portal – Click to remove a portal. See “Removing a Target Portal” on
page 96 for more information.

Target Login – Click to log into a selected target. See “Logging into Targets” on
page 98 for more information.

Target Sessions – Click to view active sessions for the selected target. See
“Viewing Target Sessions” on page 100 for more information.

Manually Add Target – Click to manually add an iSCSI target. See “Manually
Adding an iSCSI Target” on page 100 for more information.

Remove Target – Click to manually remove an iSCSI target. See “Removing
Targets” on page 100 for more information.

Refresh Targets – Click to manually force a complete rediscovery of the targets,
querying all configured iSNS servers and target portals.
Adding Target Portals
To add a target portal:
1. From the iSCSI Target Discovery tab, click Add Portal. The Add Target Portal
dialog box appears.
2. Enter the server IP address and TCP port number and click OK. After successfully
adding a target portal, that target portal's targets are discovered and appear in the
target list.
3. Specify the Portal Login Options and Authentication type you want to use.
4. Click OK.
Note: When running the open-iSCSI driver, the default open-iSCSI configuration is
for “automatic target login” at boot time for all targets discovered via the target
portal.
Removing a Target Portal
To remove a target portal:
1. From the iSCSI Target Discovery tab, select the target portal you want to remove in
the Target Portals table.
2. Click Remove Portal.
Note: The discovered targets are not removed by clearing the target portal. They
must be specifically removed using the iSCSI Target Discovery tab.
However, targets that are not logged in to when the system is rebooted are
removed (except on ESXi hosts).