Dell Emulex Family of Adapters User Manual

Page 1569

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual

P010097-01B Rev. A

4. Configuring Boot from SAN for the FCoE Protocol

Solaris

1569

Booting Solaris 10 from the Network on SPARC Machines

To boot from the network:
1. Set up the install server and the boot server (if required). See the topic for

Network-Based Installations in the Solaris 10 10/09 Installation Guide.

2. Obtain the MAC address of the OCE port used for the net boot:

a. Get the device path of the port from the show-devs command:

{0} ok show-devs

/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,3

/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,2

/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1

/pci@0/pci@0/pci@8/pci@0/pci@1/oce@0

/pci@0/pci@0/pci@8/pci@0/pci@1/emlx@0,3/fp@0,0

b. Select the OCE device to boot:

{0} ok " /pci@0/pci@0/pci@8/pci@0/pci@1/oce@0,1" select-dev

c. Get the MAC address of the selected device from its properties:

{0} ok .properties

status okay

assigned-addresses 82020014 00000000 00100000 00000000 00004000

82020018 00000000 00120000 00000000 00020000

82020020 00000000 00140000 00000000 00020000

82020030 00000000 00180000 00000000 00080000

model OCe10102

fcode-version 4.0.0.0

reg 00020000 00000000 00000000 00000000 00000000

02020014 00000000 00000000 00000000 00004000

03020018 00000000 00000000 00000000 00020000

03020020 00000000 00000000 00000000 00020000

02020030 00000000 00000000 00000000 00040000

compatible pciex19a2,700.10df.e602.2

pciex19a2,700.10df.e602

pciex19a2,700.2

pciex19a2,700

pciexclass,020000

pciexclass,0200

max-frame-size 000005ee

address-bits 00000030

supported-network-types ethernet,10000,null,full

reserved.

name oce

device_type network

manufacturer Emulex

fcode-rom-offset 00016e00

interrupts 00000001

cache-line-size 00000010

class-code 00020000