Dell Emulex Family of Adapters - Manual (Page 298)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
1. Introduction
OneCommand Manager Secure Management
298
by typing “getent group” from the shell command line. If the four
OneCommand Manager group names are listed with their member users, the
machine is ready to use OneCommand Manager secure management.
Secure Management Installation
The enabling or disabling of the Secure Management feature is specified at
OneCommand Manager installation time. This can be done either interactively or by
using dedicated install switches on Windows, Linux, and Solaris. On Linux and Solaris,
if the OneCommand Manager groups described above are not configured on the
machine at the time of the OneCommand Manager installation, installation will fail
when the secure management feature is selected.
Notes

Only a user with Administrator/Root privileges is allowed to either enable or
disable the secure management feature on a local host machine.

Management mode cannot be used if Secure Management is enabled (see the
management mode section, step 5 on page 307 for more information).
Linux and Solaris
Interactive Installation
Enterprise OneCommand Manager installations performed in interactive mode will ask
if OneCommand Manager Secure Management mode should be enabled. If the answer
is yes, the other management mode questions will be skipped. If the answer is no to the
OneCommand Manager Secure Management mode question, then the management
mode installation questions will follow.
Unattended Installation with Install Script Switch Option Support
Enterprise OneCommand Manager installations performed in unattended mode
provide a switch option to enable OneCommand Manager Secure Management. If the
OneCommand Manager Secure Management switch is not used with the installation,
Secure Management will be disabled.
Windows
During OneCommand Manager installations performed in interactive mode, you will
be presented with a management mode window where you can select Secure
Management as the management mode.