Dell Emulex Family of Adapters - Manual (Page 105)

OneCommand™ Manager Application P010066-01A Rev. A
7. Managing Hosts
Configuring iSCSI Target Discovery
105
7. Managing Hosts
There are two tabs that show host information: the Host Information tab and the Host
Driver Parameters tab. The Host Information tab is read-only. The Host Driver
Parameters tab enables you to view and define adapter driver settings for a specific
host. See “The Host Driver Parameters Tab” on page 150 for more information about
the Host Driver Parameters tab.
To view the Host Information and Host Driver Parameters tabs:
1. Do one of the following:

From View menu, click Group Adapters by Host Name.

From the toolbar, click Group Adapters by Host Name.
2. Select a host in the discovery-tree.
3. Select the Host Information tab or the Host Driver Parameters tab.
The Host Information tab displays information for the selected host such as the number
of adapters installed in the selected host and the number of fabrics to which it is
connected.
Figure 7-1 Host Information Tab
Host Information Field Definitions

Operating System – The operating system and version installed on the selected
host.

Management IP Address – If the host is discovered with FC, the Management IP
Address field displays “Host discovered over Fibre Channel”. If the host has
been added with TCP/IP access, the Management IP Address field displays the