Dell Emulex Family of Adapters - Manual (Page 112)

OneCommand™ Manager Application P010066-01A Rev. A
7. Managing Hosts
Searching for Hosts in the Discovery-Tree
112

Windows:
InstallationDriveLetter:\Program Files\Emulex\Util\Config\hostgroups

Linux: /usr/sbin/ocmanager/config/hostgroups

Solaris: /opt/ELXocm/config/hostgroups
The host group configuration files are completely interchangeable between different
operating systems. For example, the host group configuration files created on a Solaris
hosts can be copied directly to a Linux or Windows host, with no conversion required.
Searching for Hosts in the Discovery-Tree
The OneCommand Manager application enables you to search the discovery-tree for a
particular host by the host’s name. If the specified host name is found, the
discovery-tree scrolls up or down to bring the desired host name into view.
This capability is especially useful when you are searching for a host in large
installation with hundreds or thousands of hosts. It is also helpful in Fabric view mode,
since the ports on a specific host may be dispersed among several fabrics making the
ports on that host difficult to find in the discovery-tree.
To search for a host:
1. Do one of the following:

From the Edit menu, select Find... and enter the name of the host you are
searching for into the Find Host field.

From the toolbar, enter the name of the host you are searching for into the Find
Host field.
2. From the toolbar, click Find Host or press on the keyboard.
The host you are searching for is highlighted in the discovery-tree.
The Find Next option on the Edit menu, or pressing F3, enables you to continue
searching for more instances of the name you specified.