Dell Emulex Family of Adapters - Manual (Page 1582)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
6. Using the FCoE Boot BIOS Utility for x86 and x64 Architectures
Configuring Boot Devices
1582
3. Select <00> and press to clear the selected boot entry, or select a device to
configure booting by WWPN or DID and press .
4. If you select a device, you are asked for the starting LUN. Use the up and down
arrows to enter the starting LUN in hexadecimal format and press .
(Figure 6-7). The starting LUN can be any number from 0 to 255.
Figure 6-7 LUN Listing Screen
5. A screen similar to Figure 6-8 is displayed. Press .
Figure 6-8 Boot Device Selected