Dell Emulex Family of Adapters - Manual (Page 962)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
962
BM_# : EEH : State PERM Failure Driver pci error message.
PCI error cannot be recovered.
BM_# : AER EEH Resume Failed Driver pci error message.
Driver failed to resume after PCI error recovery via a chip
reset.
beiscsi_ep_connect shost is NULL Driver session management error message.
This host no longer exists. Indication of system trying to
connect to previously configured sessions through a port
that no longer exists, or its MAC address has been
changed.
BS_# : PCI_ERROR Recovery Driver session management error message.
Cannot create session, controller is busy recovering from
PCI error.
BS_# : Failed in beiscsi_open_conn Driver session management error message.
Some possible reasons for this include: non-existing
targets, wrong destination address, and target rejected
login.
BS_# : The Adapter Port state is Down!!! Driver session management error message.
An attempt was made to login to a target through a port
with link down.
BS_# : upload failed for cid # Driver session management error message.
Failed to properly disconnect.
Table 4-6 iSCSI Log Messages and Descriptions (Continued)
Log Message Description