Dell Emulex Family of Adapters - Manual (Page 941)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
941
2011: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2012: Mailbox failed , mbxCmd READ_CONFIG, mbxStatus
The READ_CONFIG mailbox command failed.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2013: Could not manually add FCF record 0, status
Could not add FCF record to the FCF list.
Data: None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2014: Invalid command
The IOCB command is invalid.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2015: Invalid CT %x command
Invalid Command-Type in the IOCB is not supported.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2017: REG_FCFI mbxStatus error HBA state
The REG_FCFI mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_MBOX
Action: None required.
2018: REG_VFI mbxStatus error HBA state
The REG_VFI mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_MBOX
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)