Dell Emulex Family of Adapters - Manual (Page 357)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Diagnostic Commands
357
GetXcvrData
This command shows transceiver data for a port on an adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetXcvrData [Type]
Parameters
Example
C:\Program Files\emulex\Util\OCManager>hbacmd h=10.192.203.154 m=cim
u=root p=Swamiji001 n=root/emulex GetXcvrData 00-00-c9-93-2f-d6
LoadList
Note: This command is not supported for OneConnect and LPe16202-series adapters.
This command shows the flash memory load list data for the adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
LoadList
Parameters
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
Type
The type of SFP data to display:

1 = Formatted data

2 = Raw data
WWPN
The WWPN of the adapter.