Dell Emulex Family of Adapters - Manual (Page 1641)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1641
Viewing the Configuration
To view the current configuration:
1. On the Controller Configuration screen, select View Configuration and press
. The View Configuration screen appears.
Figure 11-11 View Configuration Screen
From the View Configuration screen, you can view information for that specific
function, including the permanent and current MAC addresses, the logical link
status, and the SR-IOV status for NIC functions.
2. When you are finished viewing the configurations, press to return to the
Controller Configuration screen.
Configuring SR-IOV
If your system BIOS supports SR-IOV, you can enable it. SR-IOV support can only be
enabled when multichannel is disabled or it is not supported.
Notes:

SR-IOV is not supported with the NIC+RoCE personality.

SR-IOV is only available for NIC functions and not for storage (iSCSI or FCoE)
functions.