Dell Emulex Family of Adapters - Manual (Page 1163)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
1. Introduction
1163
View data      
View physical data for
10GBASE-T adapters  N/A  N/A 
UCNA -
10GBASE-T only

UCNA -
10GBASE-T only
iSCSI management  N/A  N/A  
Enable/disable FIP data  N/A  N/A 
UCNA only

DCB configuration  N/A  N/A 
UCNA only

UCNA only
Display flash contents
(wakeup parameters/flash
load list)   N/A  
FC only
LP only

FC only
LP only
Export SAN configuration
information at cluster level
and at host level N/A N/A N/A N/A  
Perform diagnostic dump at
the adapter and port level      
Personality (protocol) change
and licensing  N/A  N/A 
UCNA only

iSCSI boot firmware table
(iBFT) support  N/A  N/A 
UCNA only

Channel Management  N/A  N/A  
Single root I/O virtualization
(SR-IOV is not supported with
UMC channel management.)  N/A N/A N/A  
Virtual Ethernet Port
Aggregator (VEPA)
(SR-IOV must be enabled)  N/A  N/A  
Table 1-1 Support Provided by Emulex CIM Provider Versions (Continued)
Emulex OneCommand
Manager Application
Features
ELX CIM
Provider
Package
v10.0
ELX CIM
Provider
Package
v10.2
OneCommand
Manager for
VMware
vCenter
v10.0
OneCommand
Manager for
VMware
vCenter
v 10.2 UCNA FC UCNA FC