Dell Emulex Family of Adapters - Manual (Page 888)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
888
0260: Register NameServer error:
The REG_LOGIN mailbox command has failed for the NameServer.
Data: None
Severity: Error
Log:
LOG_ELS
Action: Check the switch configuration
0261: Cannot register NameServer login:
Either a memory allocation issue or an invalid parameter was sent to the REG_LOGIN.
Data: None
Severity: Error
Log:
LOG_ELS
Action: At least one message (0142 0121 0133 0134 0135) should precede this message.
0262: No NPIV Fabric support
The switch to which the port is connected does not support NPIV.
Data: None
Severity: Error
Log:
LOG_ELS
Action: Check the switch configuration.
0263: Discovery Mailbox error: state:
Either the driver could not allocate resources or it could not send sparam_mbox or cfglink_mbox.
Data: (1) address of sparam_mbox command (2) address of cfglink_mbox command
Severity: Error
Log:
LOG_MBOX
Action: Attempt to unload and reload the driver when it is convenient.
0264: No NPIV Fabric support
The switch to which the port is connected does not support NPIV.
Data: None
Severity: Error
Log:
LOG_ELS
Action: Check the switch configuration.
0266: Issue NameServer Req err Data:
The driver was unable to send the NameServer CT command.
Data: (1) vports fc_flag (2) vports fc_rscn_id_cnt
Severity: Error
Log:
LOG_DISCOVERY
Action: Check the port and switch configurations.
0267: NameServer GFF Rsp Error ( ) Data:
The NameServer GFF CT request failed.
Data: (1) vports fc_flag (2) vports fc_rscn_id_cnt
Severity: Error
Log:
LOG_DISCOVERY
Action: Check the port and switch configurations.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)