Dell Emulex Family of Adapters - Manual (Page 696)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
FC/FCoE Error and Event Logs
696
0x25 Invalid response tag (SLI2-3 mode)
0x26 Invalid response tag (SLI2-3 mode)
0x27 Invalid response sequence (SLI2-3 mode)
0x28 Failure on REG_LOGIN mailbox command
0x29 Unable to initiate fabric binding operation
0x2A Attempted ADISC to non-existent node
0x2B Failure on iocb context allocation
0x2C Unable to initiate nport unbinding operation
0x2D Unable to initiate nport binding operation
0x30 Failure on mailbox context allocation
0x7C Menlo initialization error
0x7D Menlo initialization error
0x7E Menlo initialization error
0xA0 Failed to initialize adapter port (OneConnect)
0xA1 Failed to initialize adapter port (LightPulse)
0xC0 Insufficient revision level for STORPORT.SYS
0xC1 Failed to allocate miniport un-cached extension
0xC2 Insufficient un-cached extension space
0xC3 Port initialization failure (OneConnect)
0xC4 Port initialization failure (LightPulse)
0xC5 Utility mailbox command error
0xC6 SLI4 Pre-initialization failure
0xD3 NPIV memory allocation failure
0xE0 Unable to allocate exchange for unsolicited ELS command
0xE1 Mis-configured ports event on indicated port, link, and status. (Bits 31-24:
Port ID; Bits 23-16: Link ID; Bits 15-8: Link status.)
0xF0 Unresponsive adapter port (SLI4 mode)
0xF4 ULP Unrecoverable Error: low part (SLI4 mode)
0xF5 ULP Unrecoverable Error: high part (SLI4 mode)
0xF6 ARM Unrecoverable Error (SLI4 mode)
0xF7 READ_NV failed (SLI4 mode)
0xF8 READ_NV failed (SLI4 mode)
0xF9 READ_REV failed (SLI4 mode)
Table A-1 Severe Errors (Continued)
Bits 0 – 7 Interpretation