Dell Emulex Family of Adapters - Manual (Page 1306)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
8. Exporting SAN Information in Cluster View
Updating Firmware for OCe10100–Series, OCe11100–Series, and OCe14100–Series Adapters
1306
8. Exporting SAN Information in Cluster View
Exporting SAN information (creating a SAN report) progresses in the background until
all the jobs are completed. During this period you can still browse through the other
tabs.
Note: Creating a SAN report can take several minutes for a large SAN.
To export SAN information:
1. Select a cluster in the vSphere console tree-view and select the Emulex
OneCommand tab.
2. From the Emulex Device Management tree, select Export San Info. The export SAN
Info pane is displayed (Figure 8-1, Export SAN Info, on page 163).
3. Click Export San Info. The Export SAN Info dialog box is displayed (Figure 8-2 on
page 164).
4. Select host or hosts to export. Optionally, select the Select/Deselect All checkbox to
select all hosts. Clear the Select/Deselect All checkbox to clear all host checkboxes.
5. Click Export.
The Export SAN Info Jobs window is displayed. The status is displayed in the
Active Jobs list (Figure 8-3 on page 164).
When the export job is completed, the entry is displayed in the Completed Jobs list
with a “Successfully completed” status.
Figure 8-1 Export SAN Info