Dell Emulex Family of Adapters - Manual (Page 1362)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1362
listprofiles
Syntax
elxvcpcmd.exe v= u= p=
ListProfiles
Description
This command shows a list of the available profile IDs and their descriptions for an
adapter. This command also shows currently active and configured profiled IDs. The
information shown with the command is useful when you are determining the
appropriate profile ID to specify for a ChangePersonality command.
Parameters
Example
elxvcpcmd.exe v=10.192.000.000 u=root p=vmware h=10.192.000.000 listprofiles
00-00-c9-12-34-56
Active Profile ID: 23
Configured Profile ID: 23
Available Profiles
ID Description
-- -----------------------------------
16 NIC
17 ISCSI initiator, no DIF
19 FCOE initiator + Target, with DIF
23 FCOE initiator + Target, no DIF
24 NIC - ETS Disabled
36 Mixed Storage, 25% ISCSI initiator only, 75% FCOE, no DIF
37 Mixed Storage, 50% ISCSI initiator only, 50% FCOE, no DIF
38 Mixed Storage, 75% ISCSI initiator only, 25% FCOE, no DIF
listsessions
Syntax
elxvcpcmd.exe v= u= p=
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of an FCoE function on the physical port.
MAC address
The MAC address of any NIC function on the physical adapter port.