Dell Emulex Family of Adapters - Manual (Page 1496)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
8. Troubleshooting
EFIBoot Diagnostic Utility
1496
EFIBoot Diagnostic Utility
The EFI Diagnostic Utility tests all adapters in your system.
Conventions

Press the up/down arrows on your keyboard to move through and highlight
menu options or configuration fields. Menus with adapter listings and
information display up to eight rows at a time. If applicable, press the up/down
arrows to scroll to additional adapters.

Press the left/right arrows on your keyboard to scroll through pages of
information.

Press to select a menu option.

Press to return to the previous menu.

Press the space bar to select or check a test data pattern. All patterns are selected
by default.

Press to view online help for a menu item.

Press to clear the status (Passed, Failed, or Unsupported) of each test on a
data test pattern menu. This clears the menu, but it does not clear the results log.

Press to execute a selected test pattern.

Press to reset the data patterns back to the default (all checked).

When you view any of the Adapter Data information, press any key to return to
the Diagnostic Main menu.
Access the EFI Diagnostic Utility
Note: Before you can use the EFI utility for the first time, you must install it.
To access the main EFI utility:
1. To view Emulex driver image handle information, at the shell prompt type:
fs0:\> drivers
A list of drivers is displayed (Figure 6-3 on page 1442.)
2. Enter this command, followed by the driver image handle for the SCSI Pass Thru
driver. For example, C2 (your driver image handle may be different):
drvdiag-s c2