Dell Emulex Family of Adapters - Manual (Page 948)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
948
2543: Mailbox command () cannot issue
The mailbox command does not have all of the fields set correctly.
Data: (1) sli_mbox_opcode (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2544: Mailbox command () cannot issue
The HBA cannot be accessed on the PCI bus.
Data: (1) sli_mbox_opcode (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2546: New FCF found index tag
A new FCF has been found.
Data: None
Severity: Error
Log:
LOG_DISCOVERY
Action: None required.
2547: Read FCF record failed
Could not read the FCF record from the firmware.
Data: None
Severity: Error
Log:
LOG_DISCOVERY
Action: None required.
2548: FCF Table full count tag
The FCF table is full.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2549: FCF disconnected from network index tag
The FCF has disconnected from the network.
Data: None
Severity: Error
Log:
LOG_DISCOVERY
Action: None required.
2550: UNREG_FCFI mbxStatus error HBA state .
The UNREG_FCFI mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_DISCOVERY. LOG_MBOX
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)