Dell Emulex Family of Adapters - Manual (Page 1455)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
6. EFIBoot
Configure Boot Parameters
1455
4. Select 1. Scan Targets and press . The system scans the adapter and shows
your targets, as shown in Figure 6-22.
Figure 6-22 Target Listing Screen
Eight targets are displayed per screen. If more than eight targets are configured,
press the right arrow key to view additional targets eight at a time.
5. Select a target row and press . LUNs for the target are displayed, as shown
in Figure 6-23.
Figure 6-23 LUN Listing Screen
Eight LUNs are displayed per screen. If more than eight LUNs are configured for
the target, press the right arrow key to view more LUNs.