Dell Emulex Family of Adapters - Manual (Page 1201)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
FC and FCoE Ports
1201
Figure 6-4 FC/FCoE Port Driver Parameters Tab
FC/FCoE Driver Parameters Tab Field Definitions

Installed Driver Type – The current driver installed on this host.

Port Parameter table – A list of port driver parameters and their current values.

Parameter – The driver parameter’s name.

Value – The driver parameter’s value.

Temporary – Indicates if the value is temporary.

Range – The range of acceptable values for the driver parameter.

Default – The driver parameter’s default value.

Activation Requirements – The steps required to activate the changed value
of the driver parameter.

Description – The driver parameter’s description.
FC/FCoE Driver Parameters Tab Buttons

Globals – Click to set a port parameter value to the corresponding host
parameter value. All parameter values will be the same as the global, or host,
values.

Restore – Click if you changed parameters, but did not click Apply and you
want to restore the parameters to their last saved values.

Defaults – Click to reset all parameter values to their default (factory) values.

Apply – Click to apply the global values.

Export – Click to save a desired port parameter configuration.