Dell Emulex Family of Adapters - Manual (Page 894)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
894
0312: Ring handler: portRspPut is bigger then rsp ring
The IOCB command rings put pointer is ahead of the get pointer.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
0313: Ring handler: unexpected Rctl Type received
The RCTL/Type of a received frame did not match any for the configured masks for the specified
ring.
Data: None
Severity: Warning
Log:
LOG_SLI verbose
Action: This error could indicate a software driver, firmware or hardware issue. Report these
errors to Technical Support.
0315: Ring issue: portCmdGet is bigger then cmd ring
The port command ring get index is greater than the size of the command ring.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a software driver, firmware or hardware issue. Report these
errors to Technical Support.
0317: iotag is out of range: max iotag wd0
The IoTag in the completed IOCB is out of range.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a software driver, firmware or hardware issue. Report these
errors to Technical Support.
0318: Failed to allocate IOTAG. last IOTAG is
The driver cannot allocate an IoTag. Display the last value used.
Data: None
Severity: Error
Log:
Always
Action: This message indicates the adapter HBA I/O queue is full. Typically this happens when
heavy I/O is running on a low-end (3 digit) adapter. We suggest you upgrade to a
higher-end adapter.
0319: READ_SPARAM mbxStatus error hba state
The driver issued a READ_SPARAM mailbox command to the HBA that failed.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a firmware or hardware issue. Report these errors to Technical
Support.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)