Dell Emulex Family of Adapters - Manual (Page 720)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
iSCSI Error and Event Log
720
0x3f Warning Command was invalidated
internally; a received PDU had
an invalid StatusSN. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x40 Warning Command was invalidated
internally; a received R2T had
invalid field(s). This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x41 Warning Command was invalidated
internally; the received PDU
had an invalid LUN. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x42 Warning Command was invalidated
internally; the corresponding
ICD was not in a valid state. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x43 Warning Command was invalidated;
the received PDU had an
invalid ITT. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x44 Warning Command was invalidated;
the received sequence buffer
offset was out of order. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x45 Warning Command was invalidated
internally; a received PDU had
an invalid DataSN. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x46 Warning Connection invalidation
completion notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x47 Warning Connection invalidation
completion with data PDU
index. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x48 Warning Command invalidation
completion notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x49 Warning Unsolicited header
notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x4a Warning Unsolicited data notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x4b Warning Unsolicited data digest
warning notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
0x4c Warning TCP acknowledge based
notification. This condition is detected by the OneConnect
firmware. If this message is unexpected, please
check your iSCSI configuration.
Table A-15 iSCSI Error Log Entries on Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows
Server 2012, and Windows Server 2012 R2 (Continued)
Message ID Severity Message Recommended Resolution