beautypg.com

Loading the oneinstall package, Driver kit installer, Loading the driver kit – Dell Emulex Family of Adapters User Manual

Page 548

background image

Quick Installation Manual for Windows Drivers

P010078-01A Rev. A

2. Driver Installation Options

Driver Kit Installer

548

Notes:

The Enterprise kit for the OneCommand Manager application does not operate

locally on Windows Server Core. You must install the OneCommand Manager

Core Kit (command-line interface only) to the Windows Server Core.

The OneInstall Installer does not allow you to perform pre-installation tasks,

unattended installations, or text-only installations. For these tasks, use the

AutoPilot Installer kits.

Loading the OneInstall Package

To install the drivers using the OneInstall package:
1. Download the OneInstall package from the Emulex website.
2. Navigate to the OneInstall package in Windows Explorer.
3. Double-click the OneInstall package. The Welcome screen appears.
4. Click Next. The Installation options screen appears.
5. Select the drivers and application that you want to install and click Next.

A progress screen appears while the OneInstall installer loads the selected drivers

and applications. When the drivers and application software are loaded, an

Installation completed screen appears.

6. Click Finish.

Driver Kit Installer

Each driver kit contains and loads all the Windows drivers for a specific protocol, and

includes ElxPlus.

FC driver package (elxdrvr-fc-.exe)

FCoE driver package (elxdrvr-fcoe-.exe)

iSCSI driver package (elxdrvr-iscsi-.exe)

NIC + RoCE driver package (elxdrvr-nic-.exe)

Note: Updating the NIC protocol driver may temporarily disrupt operation of any

NIC teams configured on the system.

Loading the Driver Kit

The driver kit copies the selected Emulex drivers and applications onto your computer.

Note: This procedure does not install drivers, and no driver changes are made until

you run the AutoPilot Installer.

To load the driver kit:
1. Download the driver kit from the Emulex website to your system.
2. Double-click the driver kit to run it. The Emulex Kit Welcome page opens.
3. Click Next. The Installation Options page opens.