Dell Emulex Family of Adapters - Manual (Page 713)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
Appendix A. Error and Event Log Information
iSCSI Error and Event Log
713
Viewing the iSCSI Error Log on Windows 7, Windows 8,
Windows 8.1, Windows Server 2008 R2, Windows Server
2012, and Window Server 2012 R2
The iSCSI driver on the Windows 7, Windows 8, Windows 8.1, Windows Server 2008
R2, Windows Server 2012, and Windows Server 2012 R2 operating systems support the
new event logging mechanism introduced by Storport. Custom event messages are
logged for a variety of events with different severity, such as informational, warning or
error. The source of the events indicates the service name and every event includes a
unique ID and a symbolic name.
0x11840002 The iSCSI driver encountered a
mismatched version of the firmware
running on the board. This error may
be followed by error codes
0x31840001 or 0x31880001 indicating
that the iSCSI driver failed to load. This failure indicates that the driver version
that is running on the system does not match
the version of the firmware on the board.
Correct this by running the installer from the
desired version.
0x11840001 The iSCSI driver detected a failure in
the hardware during initialization.
This error may be followed by error
codes 0x31840001 or 0x31880001
indicating that the iSCSI driver failed
to load. This failure indicates that the hardware has
not been initialized or is malfunctioning. This
may also indicate that the firmware is not
running correctly.
0x11800005 Both Port 0 and Port 1 links were down
for a period exceeding the LDTO. If
the UCNA has connection to the
target, there will be event log entries
from the disk subsystem indicating
that the drives were lost. If any I/Os
were in progress, the system may see
I/O errors or failures. Check the links to the UCNA. If the link is
reestablished, any sessions that previously
existed are reestablished and the devices is
available for I/O.
0x11800003 Both Port 0 and Port 1 links are down. Check the links to the UCNA.
0x31840005 Driver load failed because the PCI
Vendor ID and Device ID are not
supported. Check the configuration on the UCNA.
0x1180000A The logical link on the OneConnect
Port is down, traffic is disallowed on
this function. The iSCSI function may have been disabled in
the PXESelect application. If you disabled it
intentionally, you can ignore this message.
Table A-14 iSCSI Error Log Entries on Windows Server 2008 (Continued)
Message ID Message Description/Recommended Resolution
Table A-15 iSCSI Error Log Entries on Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows
Server 2012, and Windows Server 2012 R2
Message ID Severity Message Recommended Resolution
0x02 Info Driver loaded successfully. N/A