Dell Emulex Family of Adapters - Manual (Page 848)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
3. Configuration
Ethernet Driver Configuration
848
The following items are supported on a per-partition basis:

Per-partition statistics

LSO, LRO, RSS, and TSO needed per partition

MTU per partition

Support for NetQueues
Using NParEP
Notes:

NParEP is available only on OCe14000-series adapters.

On a four-port adapter, ARI functionality must be enabled in the PCIe
subsystem on a particular system to support NParEP on all four ports.

NParEP support is available only on Dell 13G or newer systems.

SR-IOV must be enabled in the system BIOS for NParEP to work properly on
Linux systems.
NParEP can be configured on the OCe14000 family of adapters by using the adapter
BIOS utility or the OneCommand Manager application.

To configure NParEP using the adapter BIOS utility, see the Boot for NIC, iSCSI,
FCoE, and RoCE Protocols User Manual.

To configure NParEP using the OneCommand Manager application, see the
OneCommand Manager Application User Manual or the OneCommand Manager
Command Line Interface User Manual.