Dell Emulex Family of Adapters - Manual (Page 448)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
WWN Management Commands
448
Parameters
GetWWNCap
This command shows if volatile change is supported for the WWPN.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetWWNCap
Parameters
ReadWWN
This command reads different types of WWNs.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
ReadWWN
Parameters
WWPN
The WWPN of an FC or FCoE port.
New WWPN
The WWPN of the FC or FCoE port.
New WWNN
The WWNN of an FC or FCoE port.
Type
0 = Volatile
1 = Non-Volatile
WWPN
The WWPN of an FC or FCoE port.
WWPN
The WWPN of an FC or FCoE port.
Type
0 = Volatile
1 = Non-Volatile
2 = Factory Default
3 = Current
4 = Configured