Dell Emulex Family of Adapters - Manual (Page 1238)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
iSCSI Port
1238
Figure 6-33 iSCSI Port VPD Tab
VPD Table Definitions

Product Name – The product information about a selected adapter port.

Part Number – The adapter's part number.

Serial Number – The adapter's serial number.

VO – Vendor unique data. “V” indicates a vendor-specific field. An adapter
may have none, one or more of these fields defined. Valid values for this field
are “VO” (the letter “O”, not the number zero) and “Vx” (where “x” is a
number).
Note: Some adapters may show additional VPD information such as engineering
change (EC) level and MN (manufacturer ID).
Configuring DCB Parameters for iSCSI Adapter Ports
The DCB tab displays parameters for iSCSI adapter ports.
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the iSCSI adapter port whose
FIP properties you want to configure.
3. Select the DCB tab.