Delta RMC151 - Manual (Page 634)

RMC70/150 and RMCTools User Manual
Visual J#
Visual C++ (Native Code)
RMCLink C++ Wrapper Class
Note: Drivers for use with National Instruments LabVIEW are available separately.
Supported RMC Communication Ports
RMCLink can communicate via Ethernet or serial RS-232. The table below lists the ports on
the RMCs that it can communicate with.
RMC
Module
RMCLink Supported Ports
RMC100 ENET port on the RMC100-ENET module
RS-232 Monitor port on the RMC100 CPU module
RMC150E 10/100 Enet port
RMC75E 10/100 Ethernet port
RMC75S RS-232 Monitor port
Note: If the serial settings on the second RMC75S RS-232 port are
identical to the fixed RS-232 Monitor port settings, RMCLink can
communicate with that port.
RMC75P RS-232 Monitor port
Note:
The RMC100 is not supported by RMCTools and is not documented in this help file. It appears
here only to fully explain RMCLink. Notice that RMCLink also is not a part of RMCTools, nor is
fully documented in this help file. RMCLink contains its own very detailed help.
Using RMCLink
To use RMCLink, download it from Delta's website and install it. Open the RMCLink
Documentation. You will find it on Windows Start menu > All Programs>RMCLink
Component. Determine which Interface you need to use, based on your programming
language. The How to... section is very helpful.
RMC Addresses in RMCLink
The RMCLink documentation includes the address maps you will need to use with
RMCLink to access registers in the RMCs. Notice the addresses used in RMCLink may be
different from any given in the RMC software.
6.11.16. Using Other Master Controllers with the RMC
The RMC75 and RMC150 controllers are compatible with a large number of devices, and
therefore it is not possible to include specific instructions for all compatible master controllers.
This topic provides general information on how to use other master controllers with the RMC.
The RMC is always a slave.
If your PLC, HMI or other device does not support any of the methods listed here, please
contact a Delta Computer Systems sales engineer to discuss your device. Delta strives to
support all major devices, and is interested in knowing about devices that the RMC does not
support.
Ethernet
614 Delta Computer Systems, Inc.