Delta RMC151 - Manual (Page 21)

1. Introducing the RMC Family
RMCTools and RMC Controllers Help
The RMCTools software is for setting up, tuning, programming and troubleshooting the RMC70
and RMC150 motion controllers. RMCTools does not support the RMC100, which requires
Delta's RMCWin software.
The RMCTools help provides the most complete and up-to-date information available for the
RMC70, RMC150 and RMCTools. To ensure you have the latest help file, download the latest
version of RMCTools from Delta's website www.deltamotion.com.
The RMCTools help is intended to be a reference. For a step-by-step startup procedure, see
the Startup Guide that shipped with your controller.
Video Tutorials
The Education page of Delta's website at www.deltamotion.com offers video tutorials to
help you learn the RMCTools software.
Troubleshooting
See the Troubleshooting topic.
Customer Support
Delta support is ready to assist you. Call if you have questions or need help:
Telephone: 360-254-8688 (24-hour
emergency support available)
Fax: 360-254-5435
E-mail: [email protected]
Website: http://www.deltamotion.com
Paper Copy of On-line Help
If you need a hard-copy manual, contact Delta by telephone at 360-254-8688 or email at
[email protected].
1.1. RMC Family Motion Controllers
The RMC family of motion controllers consists of the RMC100, RMC150, and RMC70. The RMC
family brings the benefits of high-performance, easy-to-use motion control to a wide range of
industrial applications. The RMCTools software supports the RMC150 and RMC70. The RMC100
requires Delta's RMCWin software.
The RMC70 is a 1-2 axis controller. The RMC100 and RMC150 are multi-axis controllers.
RMC70 RMC150
deltamotion.com 1