Using run/program mode in rmctools, Communication statistics window, Run/program mode communication statistics – Delta RMC151 User Manual
Page 227
4 Using RMCTools
Going Online or Offline
To go online or offline, select the desired controller in the Project pane, then, on the
toolbar, click the Controller button
and choose Go Online or Go Offline. The
toolbar controller indicator shows whether RMCTools is online or offline:
Offline.
Online and the controller is in PROGRAM Mode.
Online the controller is in RUN Mode.
Connecting to a Controller
Use these steps to connect from RMCTools to the RMC using the monitor port:
1. RMC75E or RMC150E:
Connect a USB cable from the PC to the USB Monitor port on the RMC.
RMC75S or RMC75P:
Connect a null-modem cable from the PC to the RS-232 Monitor port on the RMC. See
the RS-232 Monitor Port Wiring section above for cable details.
2. In RMCTools, in the Project Pane, right-click the desired controller you wish to connect
to and choose Connection Path.
3. RMC75E or RMC150E:
Choose USB and click Browse. Choose the desired RMC and click OK.
RMC75S or RMC75P:
Choose the COM port that the RMC is connected to.
4. Click Go Online.
4.5.4. Using RUN/PROGRAM Mode in RMCTools
Tip:
For more details on RUN and PROGRAM Mode, see the Run/Program Mode topic.
To change the RUN/PROGRAM in RMCTools, use the Run/Program icons in the Standard
To enter PROGRAM or RUN Mode
To enter PROGRAM or RUN mode, select the desired controller in the Project pane, then,
on the toolbar, click the Controller button
and choose RUN mode or PROGRAM
Mode. The toolbar controller indicator shows the current mode of the controller:
The controller is in PROGRAM Mode.
The controller is in RUN Mode.
4.5.5. Communication Statistics Window
deltamotion.com
207