Delta RMC151 - Manual (Page 320)

RMC70/150 and RMCTools User Manual
locked copyright notice or programming is saved, the Programming portion will be saved
in encrypted format.
A project with a locked copyright notice or programming can still be downloaded to an
RMC.
To lock the copyright notice or programming:
• On the Programming menu, choose Lock Copyright or Lock Programming. Now the
security settings cannot be changed.
Unlocking the Copyright Notice or Programming
If the copyright notice or programming has been locked, the security settings and user
programs in the project will be password protected. In order to change the security
settings or access the user programs in the project, the programming must be unlocked.
Unlocking the programming will unlock the project. Notice that the security settings will
still be set, and if downloaded to the controller, will be applied to the controller.
To completely disable the security features in a locked project, you must first unlock the
project, then disable the security settings on the Programming Security Dialog.
To unlock the copyright notice or programming:
• On the Programming menu, choose Unlock Copyright or Unlock Programming.
• Enter the correct password and click OK. Now the security settings can be changed.
• If you wish to disable the security, you can now do so on the Programming Security
Dialog.
Required Firmware
The copyright notice and password protection features require RMCTools version 3.00.0
or newer and firmware version 3.00 or newer. Copy protection requires RMCTools version
3.43.0 or newer and firmware version 3.43 or newer.
5.10. RMCTools Security Policy and Agreement
The following security policy applies to the Programming Security feature. In order to enable
the programming security feature, you must agree to this policy.
RMCTools Security Policy (RSP)
Purpose
This policy specifies the circumstances under which Delta Computer Systems, Inc. (Delta)
will disable or bypass the programming security feature enabled by the copyright holder
(“you” or “User”) of programming downloaded to RMC series controllers. Delta’s
responsive customer support is an important service that benefits you and your
customers. In order to ensure responsive service, Delta reserves the right to disable or
bypass any and all security features applied to User programming.
When will the RSP be used?
This policy is intended to apply in customer support situations, including product repairs
and phone or field service support, where an end user is unable to contact you or obtain
customer support services from you in a timely manner.
How will the RSP be used?
Delta will disable or bypass programming security if Delta is contacted by an end user and
determines that access, copying, or alteration of User programming is a necessary or
desirable measure in assisting the end user.
300 Delta Computer Systems, Inc.